Global Standards Setup

In-House Testing & R&D Facility

Uniform quality is paramount. Every manufactured batch is routed through our rigorous internal laboratory before dispatch, ensuring absolute compliance with OEM specifications.

Laboratory Capabilities

Tensile Testing Machine

Capacity: 250 kgs. Ensures optimal rupture threshold.

Dumble Cutting

Press with requested dies for precise specimen extraction.

Ageing Testing Oven

Simulates thermal degradation over extended periods.

Muffle Furnace

Operates at extreme temperatures for checking ash contents.

Specific Gravity Balance

High-precision density testing matrix.

Elongation Testing Machine

Verifies maximum continuous stretch tolerance.

Hardness Tester

Shore 'A' hardness tester to verify the rigidity of each batch.

Dimension Testing

Validation using Electronic vernier calipers & Dial Gauges.

Rubber Elastomers Comparison Chart

Comprehensive engineering data analyzing the physical, thermal, and chemical resistances of our core manufacturing compounds. Use this chart to determine the appropriate elastomer for your specific operational application.

Property / Factor	Natural Rubber	SBR	EPDM	Neoprene	Nitrile	Silicone	HNBR	Viton®	Fluorosilicone
Chemical Name	Polyisoprene	Styrene Butadiene	Ethylene Propylene Diene	Polychloroprene	Nitrile Butadiene	Polysiloxane	Hydrogenated Nitrile	Fluorocarbon	Fluorosilicone
Nomenclature	NR	SBR	EPDM	CR	NBR	Si	HNBR	FPM	FSi
Cost Factor	1	1	1	2	2	6	8	15	40
Hardness Range	30-95°	40-95°	30-85°	30-90°	40-100°	40-80°	50-95°	50-95°	40-80°
Heat Resistance (°c) Max Cont.	75°c	85°c	130°c	95°c	100°c	205°c	125°c	205°c	180°c
Heat Resistance (°c) Max Int.	105°c	115°c	150°c	125°c	130°c	300°c	160°c	300°c	200°c
Low Temp Resistance	-60°c	-55°c	-50°c	-40°c	-20°c	-60°c (-80°c)	-30°c	-20°c	-60°c
Oxidation Resistance	Fair	Fair	Excellent	Very Good	Good	Excellent	Excellent	Outstanding	Excellent
Oil Resistance	Poor	Poor	Fair	Excellent	Excellent	Excellent	Excellent	Excellent	Excellent
Fuel Resistance	Unsatisfactory	Unsatisfactory	Unsatisfactory	Poor	Fair	Unsuitable	Good	Excellent	Fair
Physical Strength	Excellent	Good	Good	Good	Good	Poor	Good	Good	Poor
Compression Set	Good	Good	Good	Fair to Good	Good	Good	Good	Good	Good
Tear & Abrasion	Excellent	Good	Good	Good	Good	Poor	Very Good	Good	Poor
Resilience	Excellent	Good	Very Good	Very Good	Good	Good	Fair	Fair	Fair
Permeability to Gases	Poor	Fairly Low	Fairly Low	Low	Low	Fairly Low	Low	Very Low	Fairly Low
Electrical Strength	Excellent	Excellent	Excellent	Good	Poor	Excellent	Poor	Good	Excellent
Flame Resistance	Poor	Poor	Poor	Self-extinguish	Poor	Good	Poor	Self-extinguish	Self-extinguish
Water Resistance	Very Good	Good	Excellent	Good	Good	Good	Very Good	Good	Good

← Swipe horizontally to view full table on mobile